Tip
Need help? Please let us know in the UMEP Community.
Please report issues with the manual on the GitHub Issues.
Please cite SUEWS with proper information from our Zenodo page.
3.3.4. Above ground state#
- PavedState#
- Requirement
Optional
- Description
Initial wetness condition on
Paved- Configuration
If unknown, model assumes dry surfaces (acceptable as rainfall or irrigation will update these states quickly).
- BldgsState#
- Requirement
Optional
- Description
Initial wetness condition on
Bldgs- Configuration
If unknown, model assumes dry surfaces (acceptable as rainfall or irrigation will update these states quickly).
- EveTrState#
- Requirement
Optional
- Description
Initial wetness condition on
EveTr- Configuration
If unknown, model assumes dry surfaces (acceptable as rainfall or irrigation will update these states quickly).
- DecTrState#
- Requirement
Optional
- Description
Initial wetness condition on
DecTr- Configuration
If unknown, model assumes dry surfaces (acceptable as rainfall or irrigation will update these states quickly).
- GrassState#
- Requirement
Optional
- Description
Initial wetness condition on
Grass- Configuration
If unknown, model assumes dry surfaces (acceptable as rainfall or irrigation will update these states quickly).
- BSoilState#
- Requirement
Optional
- Description
Initial wetness condition on
BSoil- Configuration
If unknown, model assumes dry surfaces (acceptable as rainfall or irrigation will update these states quickly).
- WaterState#
- Requirement
Optional
- Description
Initial wetness condition on
Water- Configuration
For a large water body (e.g. river, sea, lake) set WaterState to a large value, e.g. 20000 mm; for small water bodies (e.g. ponds, fountains) set WaterState to smaller value, e.g. 1000 mm. This value must not exceed StateLimit specified in SUEWS_Water.txt . If unknown, model uses value of WaterDepth specified in SUEWS_Water.txt .