Tip
Need help? Please let us know in the UMEP Community.
Please report issues with the manual on the GitHub Issues.
Please cite SUEWS with proper information from our Zenodo page.
3.3.5. Snow related parameters#
- SnowInitially#
- Requirement
Optional
- Description
Flag for initial snow status [0 or 1]
- Configuration
If the model run starts when there is no snow on the ground, set
SnowInitially
= 0 and the snow-related parameters will be set accordingly. If the model run starts when there is snow on the ground, the following snow-related parameters must be set appropriately. The value ofSnowInitially
overrides any values provided for the individual snow-related parameters. To preventSnowInitially
from setting the initial conditions, either omit it from the namelist or set to -999. If values are provided individually, they should be consistent the information provided in SUEWS_Snow.txt .
- SnowWaterPavedState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on paved surfaces
Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowWaterBldgsState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on buildings
Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowWaterEveTrState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on evergreen trees
EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowWaterDecTrState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on deciduous trees
DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowWaterGrassState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on grass surfaces
Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowWaterBSoilState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on bare soil surfaces
BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowWaterWaterState#
- Requirement
Optional
- Description
Initial amount of liquid water in the snow in water
Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackPaved#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on paved surfaces
Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackBldgs#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on buildings
Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackEveTr#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on evergreen trees
EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackDecTr#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on deciduous trees
DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackGrass#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on grass surfaces
Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackBSoil#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on bare soil surfaces
BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowPackWater#
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on water
Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracPaved#
- Requirement
Optional
- Description
Initial plan area fraction of snow on paved surfaces
Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracBldgs#
- Requirement
Optional
- Description
Initial plan area fraction of snow on buildings
Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracEveTr#
- Requirement
Optional
- Description
Initial plan area fraction of snow on evergreen trees
EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracDecTr#
- Requirement
Optional
- Description
Initial plan area fraction of snow on deciduous trees
DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracGrass#
- Requirement
Optional
- Description
Initial plan area fraction of snow on grass surfaces
Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracBSoil#
- Requirement
Optional
- Description
Initial plan area fraction of snow on bare soil surfaces
BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowFracWater#
- Requirement
Optional
- Description
Initial plan area fraction of snow on water
Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensPaved#
- Requirement
Optional
- Description
Initial snow density on paved surfaces
Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensBldgs#
- Requirement
Optional
- Description
Initial snow density on buildings
Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensEveTr#
- Requirement
Optional
- Description
Initial snow density on evergreen trees
EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensDecTr#
- Requirement
Optional
- Description
Initial snow density on deciduous trees
DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensGrass#
- Requirement
Optional
- Description
Initial snow density on grass surfaces
Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensBSoil#
- Requirement
Optional
- Description
Initial snow density on bare soil surfaces
BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowDensWater#
- Requirement
Optional
- Description
Initial snow density on
Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
- SnowAlb0#
- Requirement
Optional
- Description
Initial snow albedo
- Configuration
The recommended values can be found from SUEWS_Snow.txt