Note
Please report issues with the manual on the GitHub page.
4.6.2.1. ESTMinput¶
-
TsurfChoice
¶
Requirement: Required
Description: Source of surface temperature data used.
Configuration: Value Comments 0 Tsurf
in SSss_YYYY_ESTM_Ts_data_tt.txt used for all surface elements.1 Input surface temperature are different for ground, roof and wall. 2 Wall surface temperature is different for four directions.
-
evolveTibld
¶
Requirement: Required
Description: Source of internal building temperature (Tibld)
Configuration: Value Comments 0 Tiair
in SSss_YYYY_ESTM_Ts_data_tt.txt used.1 Tibld calculated considering the effect of anthropogenic heat from HVAC 2 Tibld calculated without considering the influence of HVAC.
-
IbldCHmod
¶
Requirement: Required
Description: Method to calculate internal convective heat exchange coefficients (CH) for internal building, wall and roof if evolveTibld is 1 or 2.
Configuration: Value Comments 0 CHs are read from SUEWS_ESTMcoefficients.txt. 1 CHs are calculated based on ASHRAE (2001) 2 CHs are calculated based on Awbi (1998).
-
LBC_soil
¶
Requirement: Required Description: Soil temperature at lowest boundary condition [˚C] Configuration: to fill
-
Theat_fix
¶
Requirement: Required Description: Ideal internal building temperature [˚C] Configuration: to fill
-
Theat_off
¶
Requirement: Required Description: Temperature at which heat control is turned off (used when evolveTibld=1) [˚C] Configuration: to fill
-
Theat_on
¶
Requirement: Required Description: Temperature at which heat control is turned on (used when evolveTibld =1) [˚C] Configuration: to fill