Note
Please report issues with the manual on the GitHub page.
4.4. Meteorological Input File¶
SUEWS is designed to run using commonly measured meteorological variables.
Required inputs must be continuous – i.e. gap fill any missing data.
Temporal information (i.e.,
iy
,id
,it
andimin
should be in local time.The table below gives the must-use (MU) and optional (O) additional input variables.
If an optional input variable is not available or will not be used by the model, enter ‘-999.0’ for this column.
Since v2017a forcing files no longer need to end with two rows containing ‘-9’ in the first column.
One single meteorological file can be used for all grids (MultipleMetFiles=0 in RunControl.nml, no grid number in file name) if appropriate for the study area, or
separate met files can be used for each grid if data are available (MultipleMetFiles=1 in RunControl.nml, filename includes grid number).
The meteorological forcing file names should be appended with the temporal resolution in minutes (SS_YYYY_data_tt.txt, or SSss_YYYY_data_tt.txt for multiple grids).
Separate met forcing files should be provided for each year.
Files do not need to start/end at the start/end of the year, but they must contain a whole number of days.
The meteorological input file should match the information given in SUEWS_SiteSelect.txt.
If a partial year is used that specific year must be given in SUEWS_SiteSelect.txt.
If multiple years are used, all years should be included in SUEWS_SiteSelect.txt.
If a whole year (e.g. 2011) is intended to be modelled using and hourly resolution dataset, the number of lines in the met data file should be 8760 and begin and end with:
iy id it imin 2011 1 1 0 … … 2012 1 0 0 …
4.4.1. SSss_YYYY_data_tt.txt¶
Main meteorological data file.
No. |
Use |
Column Name |
Description |
---|---|---|---|
1 |
iy |
Year [YYYY] |
|
2 |
id |
Day of year [DOY] |
|
3 |
it |
Hour [H] |
|
4 |
imin |
Minute [M] |
|
5 |
qn |
Net all-wave radiation [W m-2] Required if |
|
6 |
qh |
Sensible heat flux [W m-2] |
|
7 |
qe |
Latent heat flux [W m-2] |
|
8 |
qs |
Storage heat flux [W m-2] |
|
9 |
qf |
Anthropogenic heat flux [W m-2] |
|
10 |
U |
Wind speed [m s-1] Height of the wind speed measurement (z) is needed in SUEWS_SiteSelect.txt. |
|
11 |
RH |
Relative Humidity [%] |
|
12 |
Tair |
Air temperature [°C] |
|
13 |
pres |
Barometric pressure [kPa] |
|
14 |
rain |
Rainfall [mm] |
|
15 |
kdown |
Incoming shortwave radiation [W m-2] Must be > 0 W m-2. |
|
16 |
snow |
Snow cover fraction (0 – 1) [-] Required if |
|
17 |
ldown |
Incoming longwave radiation [W m-2] |
|
18 |
fcld |
Cloud fraction [tenths] |
|
19 |
Wuh |
External water use [m3] |
|
20 |
xsmd |
Observed soil moisture [m3 m-3] or [kg kg-1] |
|
21 |
lai |
Observed leaf area index [m-2 m-2] |
|
22 |
kdiff |
Diffuse radiation [W m-2] Recommended in this version. if |
|
23 |
kdir |
Direct radiation [W m-2] Recommended in this version. if |
|
24 |
wdir |
Wind direction [°] Not available in this version. |