4.5.2.1. CBLinput¶

EntrainmentType¶

Requirement

Required

Description

Determines entrainment scheme. See Cleugh and Grimmond 2000 [16] for details.

Configuration

Value	Comments
1	Tennekes and Driedonks (1981) - Recommended in this version.
2	McNaughton and Springs (1986)
3	Rayner and Watson (1991)
4	Tennekes (1973)

QH_Choice¶

Requirement

Required

Description

Determines QH used for CBL model.

Configuration

Value	Comments
1	QH modelled by SUEWS
2	QH modelled by LUMPS
3	Observed QH values are used from the meteorological input file

InitialData_use¶

Requirement

Required

Description

Determines initial values (see CBL_initial_data.txt)

Configuration

Value	Comments
0	All initial values are calculated. Not available in this version.
1	Take zi0, gamt_Km and gamq_gkgm from input data file. Theta+_K, q+_gkg, Theta_K and q_gkg are calculated using Temp_C, avrh and Pres_kPa in meteorological input file.
2	Take all initial values from input data file (see CBL_Initial_data.txt).

Sondeflag¶

Requirement

Required

Description

to fill

Configuration

Value	Comments
0	Does not read radiosonde vertical profile data - Recommended in this version.
1	Reads radiosonde vertical profile data

CBLday(id)¶

Requirement: Required
Description: Set CBLday(id) = 1 If CBL model is set to run for DOY 175–177, CBLday(175) = 1, CBLday(176) = 1, CBLday(177) = 1
Configuration: to fill

CO2_included¶

FileSonde(id)¶

Requirement: Required
Description: If Sondeflag=1, write the file name including the path from site directory e.g. FileSonde(id)= ‘CBLinputfilesXXX.txt’, XXX is an arbitrary name.
Configuration: to fill

InitialDataFileName¶

Requirement: Required
Description: If InitialData_use ≥ 1, write the file name including the path from site directory e.g. InitialDataFileName=’CBLinputfilesCBL_initial_data.txt’
Configuration: to fill

Wsb¶

Requirement: Required
Description: Subsidence velocity (m s^-1 ) in eq. 1 and 2 of Onomura et al. (2015) [17] . (-0.01 m s^-1 Recommended in this version.)
Configuration: to fill