Note
Please report issues with the manual on the GitHub page.
4.2.10. SUEWS_Soil.txt¶
SUEWS_Soil.txt specifies the characteristics of the sub-surface soil below each of the non-water surface types (Paved, Bldgs, EveTr, DecTr, Grass, BSoil). The model does not have a soil store below the water surfaces. Note that these sub-surface soil stores are different to the bare soil/unmamnaged surface cover type. Each of the non-water surface types need to link to soil characteristics specified here. If the soil characteristics are assumed to be the same for all surface types, use a single code value to link the characteristics here with the SoilTypeCode columns in SUEWS_NonVeg.txt and SUEWS_Veg.txt.
Soil moisture can either be provided using observational data in the met
forcing file (SMDMethod
= 1 or 2 in
RunControl.nml) and providing some metadata information here (OBS columns),
or modelled by SUEWS (SMDMethod
= 0 in RunControl.nml).
Caution
The option to use observational data is not operational in the current release!
No. |
Column Name |
Use |
Description |
---|---|---|---|
1 |
Code linking to a corresponding look-up table. |
||
2 |
Depth of soil beneath the surface [mm] |
||
3 |
Limit value for |
||
4 |
Hydraulic conductivity for saturated soil [mm s-1] |
||
5 |
Soil density [kg m-3] |
||
6 |
Infiltration rate. |
||
7 |
The depth of soil moisture measurements. [mm] |
||
8 |
The maximum observed soil moisture. [m3 m-3 or kg kg-1] |
||
9 |
Fraction of soil without rocks. [-] |
An example SUEWS_Soil.txt can be found below:
1 2 3 4 5 6 7 8 9
Code SoilDepth SoilStoreCap SatHydraulicCond SoilDensity InfiltrationRate OBS_SMDepth OBS_SMCap OBS_SoilNotRocks
551 350 150 5.00E-04 -999 -999 -999 -999 -999 ! Swindon (below Paved) Ward et al. (2013)
552 350 150 5.00E-04 -999 -999 -999 -999 -999 ! Swindon (below Built) Ward et al. (2013)
553 350 150 5.00E-04 -999 -999 -999 -999 -999 ! Swindon (below others) Ward et al. (2013)
661 350 150 5.00E-04 -999 -999 -999 -999 -999 ! London
-9
-9