Tip
Need help? Please let us know in the UMEP Community.
Please report issues with the manual on the GitHub Issues.
Please cite SUEWS with proper information from our Zenodo page.
3.3.2. Vegetation parameters#
- LeavesOutInitially#
- Requirement
Optional
- Description
Flag for initial leave status [1 or 0]
- Configuration
If the model run starts in winter when trees are bare, set
LeavesOutInitially
= 0 and the vegetation parameters will be set accordingly based on the values set in SUEWS_SiteInfo.xlsm. If the model run starts in summer when leaves are fully out, setLeavesOutInitially
= 1 and the vegetation parameters will be set accordingly based on the values set in SUEWS_SiteInfo.xlsm. Not LeavesOutInitially can only be set to 0, 1 or -999 (fractional values cannot be used to indicate partial leaf-out). The value ofLeavesOutInitially
overrides any values provided for the individual vegetation parameters. To preventLeavesOutInitially
from setting the initial conditions, either omit it from the namelist or set to -999. If values are provided individually, they should be consistent the information provided in SUEWS_Veg.txt and the time of year. If values are provided individually, values for all required surfaces must be provided (i.e. specifying onlyalbGrass0
but notalbDecTr0
noralbEveTr0
is not permitted).
- GDD_1_0#
- Requirement
Optional
- Description
GDD related initial value
- Configuration
Cannot be negative. If leaves are already full, then this should be the same as
GDDFull
in SUEWS_Veg.txt. If winter, set to 0. It is important that the vegetation characteristics are set correctly (i.e. for the start of the run in summer/winter).
- GDD_2_0#
- Requirement
Optional
- Description
GDD related initial value
- Configuration
Cannot be positive If the leaves are full but in early/mid summer then set to 0. If late summer or autumn , this should be a negative value. If leaves are off , then use the values of
SDDFull
in SUEWS_Veg.txt to guide your minimum value. It is important that the vegetation characteristics are set correctly (i.e. for the start of the run in summer/winter).
- LAIinitialEveTr#
- Requirement
Optional
- Description
Initial LAI for evergreen trees
EveTr
.- Configuration
The recommended values can be found from SUEWS_Veg.txt
- LAIinitialDecTr#
- Requirement
Optional
- Description
Initial LAI for deciduous trees
DecTr
.- Configuration
The recommended values can be found from SUEWS_Veg.txt
- LAIinitialGrass#
- Requirement
Optional
- Description
Initial LAI for irrigated grass
Grass
.- Configuration
The recommended values can be found from SUEWS_Veg.txt
- albEveTr0#
- Requirement
Optional
- Description
Albedo of evergreen surface
EveTr
on day 0 of run- Configuration
The recommended values can be found from SUEWS_Veg.txt
- albDecTr0#
- Requirement
Optional
- Description
Albedo of deciduous surface
DecTr
on day 0 of run- Configuration
The recommended values can be found from SUEWS_Veg.txt
- albGrass0#
- Requirement
Optional
- Description
Albedo of grass surface
Grass
on day 0 of run- Configuration
The recommended values can be found from SUEWS_Veg.txt
- decidCap0#
- Requirement
Optional
- Description
Storage capacity of deciduous surface
DecTr
on day 0 of run.- Configuration
The recommended values can be found from SUEWS_Veg.txt
- porosity0#
- Requirement
Optional
- Description
Porosity of deciduous vegetation on day 0 of run.
- Configuration
This varies between 0.2 (leaf-on) and 0.6 (leaf-off). The recommended values can be found from SUEWS_Veg.txt